Forget Milk-Bones®, tennis balls, and table scraps. In La Jolla, CA, some owners are giving a
new type of treat to their dogs: sunglasses.   

Depending on the material used to make a lens, between 4-16% of light striking the lens surface is ordinarily reflected back or "lost" by the lens. A multi-layer coating of metal oxides, just a few microns thick can significantly increase the amount of light transmitted through the lens by decreasing the percentage of light lost to reflection.

This multi-layer coating is called an anti-reflective or "AR" coating. AR coatings are placed on microscopes and camera lenses to increase light transmission and maximize image quality. AR coatings can sometimes have a faint green or purple color. This color effect can be adjusted when necessary to create a pleasing cosmetic tint, as is often done for spectacle lenses.

AR coating for glasses

Cosmetic advantage - Eye contact is an important part of human interaction. If you glance at someone wearing glasses with ordinary clear lenses, it’s sometimes hard to see their eyes. Even though the lenses are clear, their eyes are obscured by light reflected back toward you from both the front and back surfaces of the lenses.

Some light is actually being reflected from the back lens surfaces and bouncing back and forth inside the lens (between front and back surfaces), until it escapes. These "internal" reflections appear as a series of concentric reflections or rings. Thick lens edges, found in corrections for high degrees of myopia (nearsightedness), often produce rings which create a "coke bottle" look. Modern AR coatings can virtually eliminate these unsightly rings and make the lenses nearly invisible.

Nighttime advantage - Driving

When there are many light sources present, "ghost" images can be a real problem for glasses wearers; the main example of this is driving a car at night. Headlights from other vehicles and streetlights can create distracting double images that make seeing difficult and contribute to eyestrain and fatigue. AR Coatings not only reduce the ghost images but actually increase the amount of light transmitted through the lenses to the eyes. There is an overall reduction in glare and halos around lights - a welcome addition to nighttime vision.

Daytime advantage - Sunglasses

Reflections from back lens surfaces can also be annoying. This is most noticeable with sunglasses because a dark lens acts like a mirror. Under certain conditions, the wearer can actually see their own eyes reflected from the backs of the lenses. To see the effect a back-surface AR coating can have on your vision with sunglasses, cup both hands alongside your lenses, so that all light coming from behind you is blocked…the improvement may surprise you.

Improved technology

Lenses with antireflective (AR) coatings used to be hard to clean but no longer. Fingerprints and smudges have been a challenge for previous anti-reflective lenses but many lenses now incorporate advanced surface treatments that make cleaning much easier. AR coatings are also more scratch-resistant than in the past.

The next time you order glasses, be sure to ask about what’s new in lens coatings and materials…a lot has changed! If you have a strong prescription, think about requesting an AR coating in conjunction with high-index lenses to make your glasses look and feel as thin as possible. You’ll not only look better but see better too!

Vision and Health Newsletter courtesy of:

Dr. Gordon Wong

Gordon G. Wong, O.D.
Wildon C. Wong, O.D.

7825 Fay Ave.
Suite 140
La Jolla, CA 92037

858-454-4699

We would like to thank you for your patronage and for allowing our office to provide your eye care needs.

As the end of the year is quickly approaching, we want to remind you to make an appointment if you need to use money from your Flexible Spending or Health Savings account by December 31.

For your convenience we will be open Friday December 26, the day after Christmas and Saturday December 27 for appointments. Our appointments fill up quickly, so please call soon.

We look forward to seeing you and providing you with the highest quality eye care possible.

Dr. Gordon Wong
Gordon G. Wong
Wildon C. Wong

Depending on the material used to make a lens, between 4-16% of light striking the lens surface is ordinarily reflected back or "lost" by the lens. A multi-layer coating of metal oxides, just a few microns thick can significantly increase the amount of light transmitted through the lens by decreasing the percentage of light lost to reflection.

This multi-layer coating is called an anti-reflective or "AR" coating.

AR coatings are placed on microscopes and camera lenses to increase light transmission and maximize image quality. AR coatings can sometimes have a faint green or purple color. This color effect can be adjusted when necessary to create a pleasing cosmetic tint, as is often done for spectacle lenses.

AR coating for glasses

Cosmetic advantage - Eye contact is an important part of human interaction. If you glance at someone wearing glasses with ordinary clear lenses, it’s sometimes hard to see their eyes.

Even though the lenses are clear, their eyes are obscured by light reflected back toward you from both the front and back surfaces of the lenses.

Some light is actually being reflected from the back lens surfaces and bouncing back and forth inside the lens (between front and back surfaces), until it escapes. These "internal" reflections appear as a series of concentric reflections or rings. Thick lens edges, found in corrections for high degrees of myopia (nearsightedness), often produce rings which create a “coke bottle” look. Modern AR coatings can virtually eliminate these unsightly rings and make the lenses nearly invisible.

Nighttime advantage - Driving

Daytime advantage - Sunglasses

Reflections from back lens surfaces can also be annoying. This is most noticeable with sunglasses because a dark lens acts like a mirror. Under certain conditions, the wearer can actually see their own eyes reflected from the backs of the lenses. To see the effect a back-surface AR coating can have on your vision with sunglasses, cup both hands alongside your lenses, so that all light coming from behind you is blocked…the improvement may surprise you.

Improved technology

Lenses with antireflective (AR) coatings used to be hard to clean but no longer. Fingerprints and smudges have been a challenge for previous anti-reflective lenses but  many lenses now incorporate advanced surface treatments that make cleaning much easier. AR coatings are also more scratch-resistant than in the past.

The next time you order glasses, be sure to ask about what’s new in lens coatings and materials…a lot has changed! If you have a strong prescription, think about requesting an AR coating in conjunction with high-index lenses to make your glasses look and feel as thin as possible. You’ll not only look better but see better too!

Vision and Health Newsletter courtesy of:

Dr. Gordon Wong
Gordon G. Wong, O.D.
Wildon C. Wong, O.D.

7825 Fay Ave.
Suite 140
La Jolla, CA 92037

858-454-4699

When there are many light sources present, “ghost” images can be a real problemfor glasses wearers; the main example of this is driving a car at night. Headlights from other vehicles and streetlights can create distracting double images that make seeing difficult and contribute to eyestrain and fatigue. AR Coatings not only reduce the ghost images but actually increase the amount of light transmitted through the lenses to the eyes. There is an overall reduction in glare and halos around lights - a welcome addition to nighttime vision.

Our office is committed to offering quality eyewear at affordable prices.

If you do not have vision insurance we extend a 50% courtesy on the second pair of frames and lenses. For those covered under vision plans such as VSP, we offer a 30% courtesy on a second pair of frames and lenses.

We also feature several handmade frames from our Beausoleil and Alain Mikli lines that are currently 50% off.

We look forward to seeing you and continuing to provide you with the best quality eyecare possible.

Dr. Gordon Wong
Gordon G. Wong
Wildon C. Wong